ieisystem.inmanage.edit_ntp – Set NTP

Note

This plugin is part of the ieisystem.inmanage collection.

To install it use: ansible-galaxy collection install ieisystem.inmanage.

To use it in a playbook, specify: ieisystem.inmanage.edit_ntp.

New in version 1.0.0: of ieisystem.inmanage

Synopsis

  • Set NTP on ieisystem Server.

Requirements

The below requirements are needed on the host that executes this module.

  • Python 3.7+

  • inManage

Parameters

Parameter Choices/Defaults Comments
auto_date
string
    Choices:
  • enable
  • disable
Date auto synchronize.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
max_variety
integer
NTP Maximum jump time(minute),max variety(1-60).
Only the M6 model supports this parameter.
ntp_time
string
NTP time(YYYYmmddHHMMSS).
Only the M5 model supports this parameter.
password
string
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
provider
dictionary
A dict object containing connection details.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
username
string
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
server1
string
NTP Server1(ipv4 or ipv6 or domain name), set when auto_dateis enable.
server2
string
NTP Server2(ipv4 or ipv6 or domain name), set when auto_date is enable.
server3
string
NTP Server3(ipv4 or ipv6 or domain name), set when auto_date is enable.
server4
string
NTP Server1(ipv4 or ipv6 or domain name), set when auto_dateis enable.
server5
string
NTP Server2(ipv4 or ipv6 or domain name), set when auto_date is enable.
server6
string
NTP Server3(ipv4 or ipv6 or domain name), set when auto_date is enable.
syn_cycle
integer
NTP syn cycle(minute),sync cycle(5-1440).
time_zone
string
UTC time zone,chose from {-12, -11.5, -11, ... ,11,11.5,12}.
username
string
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

Notes

Note

  • Does not support check_mode.

Examples

- name: NTP test
  hosts: inmanage
  connection: local
  gather_facts: no
  vars:
    inmanage:
      host: "{{ ansible_ssh_host }}"
      username: "{{ username }}"
      password: "{{ password }}"

  tasks:

  - name: "Set ntp"
    ieisystem.inmanage.edit_ntp:
      auto_date: "enable"
      server2: "time.nist.gov"
      provider: "{{ inmanage }}"

  - name: "Set ntp"
    ieisystem.inmanage.edit_ntp:
      auto_date: "disable"
      ntp_time: "20200609083600"
      provider: "{{ inmanage }}"

  - name: "set ntp"
    ieisystem.inmanage.edit_ntp:
      time_zone: "8"
      provider: "{{ inmanage }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
Check to see if a change was made on the device.
message
string
always
Messages returned after module execution.
state
string
always
Status after module execution.


Authors

  • WangBaoshan (@ieisystem)